Vortigern Replacement Twin Pack of Padding and Safety Enclosure Netting for 14ft Diameter Trampoline
Feature
- DELIVERY TO THE CHANNEL ISLANDS NOT AVAILABLE Your trampoline must be 14ft wide across the frame and the enclosure must have 8 poles for this refurbishment set to fit.
- Netting with 8 Sleeves, for trampolines with 4 "U" shaped legs
- Netting has zip closure systems and is UV Resistant. It is 170cm tall.
- Does not include the enclosure poles or fixings - this is to replace solely the worn / broken netting on your trampoline with an existing safety net.
- Padding fits all 14ft Round Trampolines with spring size up to 7 inches
Product Overview
You are buying a pad and a net ONLY. They are to replace the damaged/worn out pads and netting of your existing trampoline.The net does not come with any poles or fixings. The netting is designed to go round the outside rim of your trampoline therefore preserving the maximum jumping area. The netting has sleeves that slide over your enclosure poles. Make sure that your enclosure has 8 poles and that you have measured the width of your trampoline correctly before buying. The diameter of your trampoline is the distance across the top frame ring from outside metal edge to outside metal edge through the centre of the trampoline - it is not the size of the mat.
The reinforced pad is suitable for round trampolines with spring sizes up to 7 inches. The impact resistant foam core is tapered. The padding is 21mm at the edge of the trampoline where the top ring of the frame is, and is 6mm across the top of the springs. The PE outer is reinfoced and is UV stabalised .
0 comments:
Post a Comment